Tec7 x-seal cartridge 310 ml, concrete gray - 528015000

The X-Seal is an extremely flexible and mould-resistant sealant based on MS hybrid polymer. This versatile sealant adheres to almost all building materials, even on damp substrates, and is perfectly paintable. Suitable for indoor and outdoor applications. Special features: Extremely flexible and satin-finish Adheres to most building materials, even wet surfaces Mould-resistant and safe to use Perfectly paintable Suitable for indoor and outdoor applications Technical data Base: MS hybrid polymer Odour: Neutral Shore-A hardness (DIN 53505): 32 Modulus of elasticity at 100% elongation (DIN 53504 S2): ± 0.6 N/mm² Elongation at break (DIN 53504 S2): ± 600% Elastic recovery (DIN EN ISO 7389): > 60% Tensile strength (DIN 53504 S2): ± 1.6 N/mm² Movement capability: 20% Consistency (DIN EN ISO 7390): Stable up to = 3 mm Curing: Polymerisation under the influence of humidity Application temperature: +5°C to +40°C Open time at 23°C / 50% R.H.: Max. 30 min Curing rate at 23°C and 50% R.H.: After 24 hours: ± 2.5 mm After 48 hours: ± 3.5 mm Shrinkage after curing (DIN EN ISO 10563): = 3% Density: 1.48 ± 0.05 g/cm³ Temperature resistance: -40°C to +90°C Chemical resistance: Good: water, aliphatic solvents, oils, greases, diluted organic acids and bases Moderate: esters, ketones and aromatics Not resistant to: concentrated acids and chlorinated hydrocarbons Weather resistance: Very good Shelf life: 18 months (store in a cool, dry place in original packaging) Frost resistant during transport: Up to -15°C Included as standard: 1x X-Seal Cartridge | Concrete Grey Documents: 528015000 Technical data 528015000 Safety data sheet