Soudal sws inside standard | window connection foil | 70x30mm - 145962

SWS Inside Standard is an airtight and vapor-retardant window connection film for interior use, with a powerful self-adhesive strip for attachment to the window side. Always fully bonded to the inner cavity wall using Soudafoil 330D or 360H. Directly plasterable. Part of the SOUDAL WINDOW SYSTEM.Special characteristicsAirtightVapor-retardantSelf-adhesive strip for attachment to the window profile (pressure-sensitive)FlexiblePlasterable and paintableTear-resistantGood temperature resistanceSuitable for uneven surfacesEasy installation, easily foldable in the cornersApplicationSWS Inside Standard window tapes ensure an airtight and vapor-retardant connection of the window frame to the surrounding load-bearing structure. This flexible membrane can also be used as an airtight seal for all types of wall connections, even on uneven surfaces. For indoor use only.Instructions for useSWS Inside Standard should only be applied indoors. Depending on the situation, the installation of SWS Inside Standard can be done before or after the installation of the facade element (e.g., window frame). There are 2 methods for applying SWS Inside Standard. You can work with a single strip or with 4 separate strips. In both cases, extra material must be provided for the corners (approx. 5 to 10 cm per corner). After unrolling and removing the protective film, glue the film with the exposed adhesive strip (on the printed side) to the side OR to the front of the facade element. Both sides of the film are plasterable and paintable. To bond the film to the raw construction, Soudafoil 360H or 330D must be used. Glue the film, not too tightly, to the raw construction to accommodate any movements between the different building elements, but avoid folds. Then press the film evenly with a pressure roller. Consult the technical data sheet for more information.