Ate brake bleeding device fb 5 ev brakes fan fb5ev

For filling, flushing and bleeding modern electronic brake systems, 5 liters, for Low viscosity brake fluids Variable pressure setting from 0.4 to 3.5 bar for all pressure ranges from leading car manufacturers. The working pressures are set to the desired working pressure with a rotary knob and can be checked with a class 1.6 pressure gauge. A special pump generates a pulsating fluid flow that supports the flushing and bleeding of the brake system. The system is filled directly from the 5 liter jerry can, so decanting is not necessary. The collection cup is firmly secured in the device. The suction lance is held securely in the tank with a rubber sealing cone. Permanent pressure monitoring switches off the supply pump when the reservoir is empty, so that no air can enter the braking system. With holder for the filling hoses and power cable on the side of the device, as well as holders for three venting connections on the rear wall of the device. Incl. bleed connection no.: 20. Technical data: Brake fluid capacity: 5 liters Mains connection: 230 V ~, 50 - 60 Hz Flow rate Pumps: approx. 24 l/h at 2 bar back pressure Working pressure: 0.4-3.5 bar infinitely adjustable Automatic limit switch-off of the pumps: at approx. 9 mm residual level in the container Connection cable: 5 m IEC Filling hoses: 3.5 m Dimensions (H x W x D): 530 x 285 x 250 mm Noise level: 66 dB(A) Included in delivery: Device, operating instructions, bleed connection no.: 20 Flow rate 24 l/h Main color black Height 530.0 mm Capacity 5000 ml Application range brake / hydraulic line Length 250.0 mm Secondary color blue Application bleeding, filling, flushing Application car Type/kind Article Braking system design Working pressure 3.5 bar